Brandt FB2000E User Manual download pdf (Page 10)

Positioning

Install this appliance at a location where the

ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility if

the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Di-

rectives.

Door reversibility

The door of the appliance opens to the right.

If you want to open the door to the left, follow

these steps before you install the appliance:

1. Loosen and remove the upper pin.

2. Remove the door.

3. Remove the spacer.

4. With a key, loosen the lower pin.

On the opposite side:

1. Tighten the lower pin.

2. Install the spacer.

3. Install the door.

4. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

min.

200 cm

2

min.

200 cm

2

Installing the appliance

Caution! Make sure that the mains

cable can move freely.

Do the following steps:

1. Drill the unit using a Ø 2.5 mm drill (10

mm max. penetration).

Fix the square fitting to the appliance.

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments