Brandt FB2000E User Manual download pdf (Page 29)

Control panel

1 2 3 4

1 ON/OFF switch

2 Display

3 Function button / Reset alarm

4 Temperature regulator

Display

1 2 3 4

1 Door open alarm indicator

2 Positive or negative temperature indica-

tor

3 Temperature indicator

4 Super indicator

Switching on

After plugging the plug into the power outlet,

if the display is not illuminated, press ON/OFF

switch, appliance on.

As soon as the appliance is turned on, the

following signals will appear on the control

panel:

• Positive or negative temperature indicator

will be positive, indicating that the temper-

ature is positive

• the Temperature indicator flashes, the

background of the display is red and you

will hear a buzzer.

Press Function button and the buzzer will go

off (also see "Excessive temperature alarm" ).

Place the Temperature regulator in a middle

position, and the appliance will be set up to

provide the following temperature:

roughly -18°C in the freezer.

Functions Menu

Each time Function button is pressed, the

following functions are activated in a clock-

wise direction:

• Super function

• no symbol: normal operation.

Switching off

The appliance is shut off by pressing ON/OFF

switch for more than 1 second.

After this, a countdown of the temperature

from -3 -2 -1 will be shown.

When the appliance is switched off, Display

also goes off.

Temperature regulation

The temperature within the appliance is con-

trolled by the Temperature regulator situated

at the top of the cabinet.

To operate the appliance, proceed as fol-

lows:

• turn the knob clockwise to obtain the max-

imum coldness

• turn the knob counter- clockwise to obtain

the minimum coldness.

The intermediate position is usually the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

Super function

You can activate the Super function by

pressing the Super button.

The Super light will light up.

29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments