Brandt SB3050E User Manual download pdf (Page 6)

PR168

PR167/1

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

Fix cover (D) on guide (B) until it clips into place.

Open the appliance door and the furniture door at

90°. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ø 2 mm at

8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

8mm

PR167

Place guide (A) on the inside part of the furniture

door, up and down as shown in the figure and mark

the position of external holes. After having drilled

holes, fix the guide with the screws supplied.

20 mm

50mm

PR166

PR33

Fix cover (C) on guide (A) until it clips into place.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

No comments

Brandt SB3050E User Manual Page 6