Brandt CA2952E User Manual download pdf (Page 38)

1. Switch off the appliance.

2. Remove any stored food, wrap it in sev-

eral layers of newspaper and put it in a

cool place.

Caution! Do not touch frozen goods

with wet hands. Hands can freeze to the

goods.

3. Leave the door open and insert the plas-

tic scraper in the appropriate seating at

the bottom centre, placing a basin un-

derneath to collect the defrost water

In order to speed up the defrosting proc-

ess, place a pot of warm water in the

freezer compartment. In addition, re-

move pieces of ice that break away be-

fore defrosting is complete.

4. When defrosting is completed, dry the in-

terior thoroughly and keep the scraper for

future use.

5. Switch on the appliance.

6. After two or three hours, reload the pre-

viously removed food into the compart-

ment.

Warning! Never use sharp metal tools

to scrape off frost from the evaporator

as you could damage it.

Do not use a mechanical device or any

artificial means to speed up the thawing

process other than those recommended

by the manufacturer.

A temperature rise of the frozen food

packs, during defrosting, may shorten

their safe storage life.

Periods of non-operation

When the appliance is not in use for long pe-

riods, take the following precautions:

• disconnect the appliance from elec-

tricity supply

• remove all food

•

defrost

12)

and clean the appliance and all

accessories

• leave the door/doors ajar to prevent un-

pleasant smells.

If the cabinet will be kept on, ask somebody

to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

What to do if…

Warning! Before troubleshooting,

disconnect the mains plug from the

mains socket.

Only a qualified electrician or competent

person must do the troubleshooting that

is not in this manual.

Important! There are some sounds during

normal use (compressor, refrigerant

circulation).

Problem Possible cause Solution

The appliance does not

operate. The lamp does

not operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical appli-

ance to the mains socket.

Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by. Close and open the door.

12) If foreseen.

38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comments to this Manuals

No comments